Eaton EX RT 7/11 Manuel D'installation Et D'utilisation page 26

2. Installation
Connection of battery cables
Connection of galvanic isolation transformer
Transformer Input
Transformer Output
z Output cable cross-section (not provided): 10 mm², solid or stranded wire (maximum 13 mm² or AWG 6).
Input cable cross-section (not provided): 10 mm², solid or stranded wire (maximum 13 mm² or AWG 6).
z
Page 24 - 34007558EN/AE
1 - Check that the battery circuit
breaker is OFF ("0" position),
4 12
2 - Connect the battery power cable
to the connectors
6
29
battery modules,
3 - Connect the battery detection cable
to the connectors
29
and battery modules.
28
6
12
INPUT
OUTPUT
28
of the power and
of the power
4
N
L
N
L