marklin ICE3 Serie Mode D'emploi page 18

9. Information about Operating the Train
- When running the train, make sure that the
remote controller is always pointed at the train.
- If the train goes outside of the range of the
remote controller (approximately 6 meters / 20
feet) it will go further but cannot be controlled
any more.
- After 5 minutes without a signal set at go by the
remote control, the train remains stopped. It
can be started again by any signal set at go.
After 10 minutes without a signal set at go, the
train shuts off. The train must first be turned
on again at the controller in order for it to start
again.

- No obstacle can be allowed between the train
and the remote controller.
- Do not turn the remote controller away from the
train.
18