Put the cover for the battery holder back in
3
place.
Screw the battery holder down into place.
6.3 Motor Car with the Battery Car
Unscrew the battery holder.
1
Remove the battery holder.
1.
2.
14
3.
1.
3.
2
Do not lay the contacts for the battery
pack on a conductive surface and/or do
not short circuit these contacts – This may
cause a fire!
Insert four (4) type AA/LR 06 batteries as shown in
the drawing.
Install or change the four (4) batteries
only as a group! Pay attention to the
polarity!
Slide the battery holder into place
3
4.
4.