Balluff BTL7-V50D-M0500-P-C003 Notice D'utilisation page 27

BTL7-V50D-M _ _ _ _ -P-C003
Transducer in a Profile Housing
3
Construction and function (continued)
3.3 LED display
LED 4
(Link/Activity
OUT)
LED 1
(BTL status)
Fig. 3-2: BTL7 LED displays
3.3.2 LED 2: Network status (dual LED)
LED 2
Red Green
Off Off
Off Flashing
Off On
Flashing Off
On Off
Blinkend Flashing
Tab. 3-2: LED 2
3.3.3 LED 3 / LED 4: Link/Activity
LED 3/LED 4 Status
Green
On Port open
Off Port closed
Tab. 3-3: LED 3/4
www.balluff.com
LED 3
(Link/Activity
IN)
LED 2
(Network
status)
Meaning Cause
Not switched on, no IP The device is either switched off or the device is switched on, but no IP
address address was configured.
No connection The device has an IP address, but there is no connection to a master yet.
Connected The device is connected with the master.
Connection time-out An existing connection was interrupted by a time-out.
IP address conflict Another user on the network has an identical IP address.
Self-test The device performs a self-test at startup. During the self-test, the LED
flashes red and green alternately.
Connection
Yes
No
3.3.1 LED 1: BTL status
LED 1 Operating state
Green Normal function
Magnet is within the limits.
Red Error
No magnet or magnet outside the limits.
Tab. 3-1: LED 1
english 7