Eaton TRIPP LITE Serie Instructions D'installation page 7

6. Installing Branch Cables
There are 4 small ports for the uncut cables in the bottom box. Use a Ø8-Ø14 Single Hole
Grommet or Ø14-Ø18 Single Hole Grommet depending on the cable diameter size.
1
Remove the nuts, seals, hoops, armor tableting and steel core using an M31 wrench.
2 Pass the peeled OF fiber to M31 or M55 nut (plastic), washer (stainless steel), seal and
washer (stainless steel).
23-04-059-9347BA.indb 7 23-04-059-9347BA.indb 7
Ø8-Ø14 Single
Hole Grommet
(for M31 cable
entry) or Ø14-Ø18
Single Hole
Grommet (for
M31 cable entry)
M31 Plastic Nut
Ø12-Ø17.5
Single Hole
Grommet
(for M55 cable
entry)
1/3/2024 4:28:20 PM 1/3/2024 4:28:20 PM
7