Eaton TRIPP LITE Serie Instructions D'installation page 6

5. Closure Assembly
Push the cabling through the double block, double clamp and double hole grommets.
1
Note: When this double hole cable entry is not used, a choke plug should be used to seal the double hole
grommet.
Tighten the hex screws to secure the double block, double clamp and double hole
2
grommets to the closure base.
Note: The seal ring is made of rubber and the components are made of plastic. When securing, use the
appropriate force (5 N·m or 44.3 lbf·in).
When this double hole cable entry is not used, the included choke plugs should be used to
seal the double hole grommets.
6
23-04-059-9347BA.indb 6 23-04-059-9347BA.indb 6
Push
PN 411820
Choke Plug
Description
(Ø14 mm)
Quantity 6 Pcs.
1/3/2024 4:28:20 PM 1/3/2024 4:28:20 PM