Eaton TRIPP LITE Serie Instructions D'installation page 10

8. Box Encapsulation
Load the cable seals into the box, put together the box top and base, and seal with the plastic hoop.
Test the Seal
Test the seal after being filled air in the closure and filled other inertia air according to the user
application. Make sure to be aware of the grounding. Also make sure to inspect all fibers inside
so as to confirm no fibers are damaged.
Barometer
(Optional)
10
23-04-059-9347BA.indb 10 23-04-059-9347BA.indb 10
Valve
Grounding
1/3/2024 4:28:21 PM 1/3/2024 4:28:21 PM