Publicité
Les langues disponibles
Les langues disponibles
7. ETC Mode setting
9. Battery Pack Release Button
Model Number
Voltage
Drive/Anvil
Tightening Torque
No Load Speed
Impacts per Minute
Tool Weight(with battery 2.5Ah)
Tool Weight(with battery 5.0Ah)
WARNING
− that the vibration emission during actual use of the power tool can differ from the
declared total value depending on the ways in which the tool is used; and
− of the need to identify safety measures to protect the operator that are based on an
estimation of exposure in the actual conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is switched off and when it is running
idle in addition to the trigger time).
INSTALLING OR REMOVING BATTERY PACK
TO REMOVE BATTERY PACK: Depress the battery pack release button (8) and pull
the battery pack (9) out of tool.
TO INSTALL BATTERY PACK: Push the battery pack (9) onto tool until it locks in
place.
INSTALLING SOCKETS
Always follow the procedure below to install a socket.
1. Insert a socket into the anvil (2).
2. Make sure the bit is fixed in the anvil while clicking on the ball of the anvil.
1English1
8. Power indicator
10. Battery Pack
SPECIFICATIONS
Unit
V d.c.
in.
1/4" Hex.
ft-lbs
/Nm
rpm
ipm
lbs/kg
lbs/kg
ASSEMBLY
English
-7
RI20173
20
73 / 100
133 / 180
162 / 220
1200
1900
3000
0-3000
3.37/1.53
3.98/1.81
RI20174
1/2" Sq.
73 / 100
221 / 300
369 / 500
1500
1800
2100
Publicité
