Publicité
Les langues disponibles
Les langues disponibles
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries
f.
may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
g.
Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or
temperature above 130 °C may cause explosion. NOTE The temperature „130 °C" can be replaced by
the temperature „265 °F".
Follow all charging instructions and do not charge the battery pack or tool outside the
h.
temperature range specified in the instructions. Charging improperly or at temperatures outside
the specified range may damage the battery and increase the risk of fire.
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
Tool service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel may result in a risk of injury.
When servicing a tool, use only identical replacement parts. Follow instructions
in the Maintenance section of this manual. Use of unauthorized parts or failure to
follow Maintenance Instructions may create a risk of shock or injury.
SPECIFIC SAFETY RULES AND SYMBOLS
CAUTION
Hold the power tool by insulated gripping surfaces, when performing an operation where the
fastener may contact hidden wiring or its own cord. Fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and could give the operator an electric shock.
Be aware that this tool is always in an operating condition, because it does not have to be plugged
into an electrical outlet. Always set the trigger switch to the locked OFF position when installing or
removing the battery pack or bits.
Do not use bits or sockets larger than those recommended. Large bits or drills may overload the
wrench/driver and damage the motor and gears.
Do not use if chuck jaws or other parts are cracked or worn.
Never change direction of rotation until motor has completely stopped.
Never hold work in your hand, lap, or against other parts of your body when driving.
Do not use drill as a router or try to elongate or enlarge holes by twisting the drill bit. Drill bits may
break and cause injury.
Keep hands away from rotating parts.
Keep drill bit clear of yourself and all objects while installing and removing bit.
Some wood contains preservatives which can be toxic. Take extra care to prevent inhalation and skin
contact when working with these materials. Request, and follow, all safety information available from
your material supplier.
Do not stare at operation lamp.
1English1
SERVICE
SYMBOLS
English
-5
Publicité
