Télécharger Imprimer la page

Elica BOXIN DRY Prescriptions De Montage Et Mode D'emploi page 8

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
• For maximum performance of the NO DRIP SYSTEM, when cooking high moisture foods, it is advisable to use the hobs
at the back.
• The grease filters should not be removed once cooking has terminated to allow time for the collected condensation in the
grease filter to settle in the tray.
• The rate of condensation collection increases with increasing suction speed (power).
• The NO DRIP SYSTEM offers the best performance in an environment with a temperature between 18°C and 25°C.
• Always open the steam collector (panel) to its full range of motion.
OPERATION
T1
T2
T3
T1 = Motor OFF button.
T2 = Suction power 1 selection button.
T3 = Suction power 2 selection button.
T4 = Suction power 3 selection button.
T5 = Intensive suction power 4 selection button.
It lasts 5 minutes, after which it goes back to the previously selected setting.
It is possible to exit this mode by pressing any button.
T6 = Light ON/OFF button.
NB: Please note that there will be a 5-second delay when switching directly to suction power 1 (from any other speed)
due to the electronic control of the product.
Filter Saturation indicator lights
At regular intervals, the hood signals the need to perform maintenance on the filters.
- Keys T6 and T5 on with light flashing very slowly: the grease filter requires maintenance.
- Keys T6 and T5 on with light flashing quickly: the odour filter requires maintenance.
Note: The filter saturation warning signal is visible within the first 10 seconds after the hood is switched on.
Reset filter saturation indicator:
Press and hold keys T6 and T5, the keys will flash quickly to confirm the reset.
Activation of filter saturation indicators:
Note: this operation must be performed with the hood off.
- Grease filter
press and hold keys T6 and T5 to activate the function, the keys will light up and the light will flash very slowly,
indicating that the grease filter indicator can be activated.
Note: Press keys T2 and T1 to activate or deactivate.
- Odour filter
Press and hold keys T6 and T5 to activate the function, the keys will light up and the light will flash quickly, indicating that
the odour filter indicator can be activated (normally deactivated).
Note: Press keys T2 and T1 to activate or deactivate.
MAINTENANCE WARNINGS
• Cleaning: For cleaning, simply use a cloth moistened with neutral liquid detergents. Do not use cleaning tools or
instruments.
• Avoid the use of abrasive products. DO NOT USE ALCOHOL!
For product maintenance, see the images at the end of the installation marked by this symbol.
Anti-Grease Filter: The metallic anti-grease filter must be cleaned once a month with non-aggressive detergen-
ts, manually or in a dishwasher on a short wash at low temperatures. To remove the anti-grease filter, pull the spring re-
lease handle.
T4
T5
T6
8

Publicité

loading

Ce manuel est également adapté pour:

Prf0181520Prf0181068