Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE INSTRUCTIONS
Maintenance instructions:
@ Clean lint screen after each cycle.
@ Removing accumulated lint (disconnect dryer from electricity
and gas supplies before starting this task):
« From inside the dryer cabinet:
Lint should be removed every 2 years or more often,
depending on dryer usage. Cleaning should be done
by a qualified person.
« From the exhaust vent:
Lint should be removed every 2 years, or more often,
depending on dryer usage.
If dryer does not operate, check the following:
@ Electric supply is connected.
@ Circuit breaker is not tripped or fuse is not blown.
@ Door is closed. Listen closely to hear door switches activate.
@ Selected cycle button has been pressed firmly and display
shows cycle time.
@ Check that gas supply shutoff valves are set in open position.
If you need assistance:
Contact your authorized Maytag® Commercial Laundry distributor
or visit: www.MaytagCommercialLaundry.com. When you call,
you will need the dryer model number and serial number.
Both numbers can be found on the serial-rating plate located
on your dryer.
TECHNICAL SPECIFICATIONS - GAS DRYER
(uncertainty, Kpa: +/-10 dBA) Total mass: 68 kg max.
European Country:
220-240V~50Hz 1ph 3A max. IP24 Clothes capacity: 9.0 kg max. Sound pressure level, Lpa: 58 dBA
Factory set for NATURAL GAS: Injector size: 2.2 mm_
Heat input gross: 5.9 kW
CH, CZ, CY, ES, GB, GR, HR,
IE, IT, PT, SL SK, TR
CY, CZ, DK, EE, FI, GR, HU, IT,
NO, RO, SE, SK, TR
10
European Gas Category:
loug4
llou3B/P
Gas Flow Rate:
0.562703 m°/hr
0.562703 m°/hr
Supply Pressure (G20):
20 mbar
20 mbar
Factory Adjusted Pressure:
7.4 mbar
7.4 mbar
With LP Gas Conversion Kit: Injector si
European Country:
ze. 1.25mm_
Heat input gross: 6.4 kW
CH, CZ, CY, ES, GB, GR, HR,
IE, IT, PT, SI, SK, TR
CY, CZ, DK, EE, Fl, GR, HU, IT,
NO, RO, SE, SK, TR
With France/Belgium NATURAL GAS conversion kit: Injector size: 1.65 mm
Heat input gross: 5.9 kW
European Country:
FR, BE
European Gas Category:
logy
Supply Pressure (G20):
20 mbar
Supply Pressure (G25):
25 mbar
Adjusted Pressure:
N/A
NOTE: Conversion kit: Frorn Natural Gas to LP Gas: Whirlpool Part No. W10233219.
Conversion kit: From Natural Gas to Natural Gas - France/Belgium: Whirlpool Part No. W10181947.
Manufacturer: Whirlpool Corporation, Benton Harbor, Michigan 49022, U.S.A.
Manufacturing Site: Whirlpool Corporation, 1300 Marion-Agosta Rd., Marion, OH 43302, U.S.A.
EU representatives: Maytag UK Ltd., 2 St. Annes Bivd., Redhill, RH1 1AX, UK
& Bauknecht Hausgerate GmbH,
D-73614 Schorndorf, Germany
Publicité
