turning meat and poultry and under no circumstances use it for other purposes
or allow it to encounter other foods.
•
Ovenware: place the food in a microwaveable shallow dish, e.g. a china or glass
plate, but do not cover.
The defrosted food should be left to stand for an additional 10 to 30 minutes until it
reaches an even temperature. Large pieces of meat require a longer standing time
than smaller pieces. Flat pieces of meat and items made from minced meat should
be separated from each other before leaving to stand. After this time, you can
continue to prepare the food, even though thick pieces of meat may still be frozen in
the middle.
Once selected your cooking function and the temperature you can enter a
cooking time for your dish.
Set a cooking time: Once selected your cooking function press the - key and
turn the right knob to adjust your cooking time. Then press the start key - to
launch your cooking. Once your cooking is completed the oven will beep and switch
off automatically.
Set a delay departure: This function enables you to plan the departure time for
your cooking.
In stand-by mode press the - key and adjust the time you want your cooking to
stop by turning adjusting knob. The delay departure icon will appear in the display.
You can then select your cooking function, temperature and cooking time as
explained previously. Once your program is completed your selection will appear in
the display and the oven will be in waiting state. When the delay departure time is
reached your cooking will start automatically; Once cooking completed the oven will
switch off automatically.
If you want to cancel the cooking process, press - key.
Set a minute minder: You can use the timer as a kitchen timer. It runs
independently of the oven. The timer has its own audible signal. In this way, you can
tell whether it is the timer or a cooking time which has elapsed.
In stand- by mode press - key. Adjust requested time with the adjusting knob.
Press again - . The minute minder count-down is starting.
3. EXTRA FUNCTIONS
3.1 Quick preheat
To shorten preheat time you can use quick preheat function. It is available on the
following functions:
32