Publicité
Les langues disponibles
Les langues disponibles
•
Under no circumstances may the design of the
product be modified without the permission of the
manufacturer. Never use a product that has been
modified in any way from its original specification
and always use original accessories. Non-
authorized modifications and/or accessories can
result in serious personal injury or the death of
the operator or others.
•
The inside of the muffler contain chemicals that
may be carcinogenic. Avoid contact with these
elements in the event of a damaged muffler.
•
This product produces an electromagnetic field
during operation. This field may under some
circumstances interfere with active or passive
medical implants. To reduce the risk of serious or
fatal injury, we recommend persons with medical
implants to consult their physician and the
medical implant manufacturer before operating
this product.
Vibration safety
This product is for occasional operation only.
Continuous or regular operation of the product
can cause "white finger" or equivalent medical
problems from vibrations. Examine the condition of
your hands and fingers if you operate the product
continuously or regularly. If your hands or fingers
have discoloration, have pain, tingle, or are numb,
stop work and speak to a physician immediately.
Safety instructions for operation
WARNING:
instructions that follow before you use
the product.
•
You must understand the difference between
grass clearing and grass trimming before use.
•
If you encounter a situation where you are
uncertain how to proceed you should ask an
expert. Contact your dealer or your service
workshop. Avoid all usage which you consider to
be beyond your capability.
•
Never use a product that is faulty. Carry out
the safety checks, maintenance and service
instructions described in this manual. Some
maintenance and service measures must be
carried out by trained and qualified specialists.
Maintenance on page 19 .
Refer to
•
All covers, guards and handles must be fitted
before you start the product. Ensure that the
spark plug cap and ignition lead are undamaged
to avoid the risk of electric shock.
•
Never use the product if you are fatigued,
while under the influence of alcohol or drugs,
medication or anything that could affect your
vision, alertness, coordination or judgement.
•
Do not use the product in bad weather such as
dense fog, heavy rain, strong wind, intense cold,
etcetera. Working in bad weather is tiring and
often brings added risks, such as icy ground,
unpredictable felling direction, etcetera.
12
Read the warning
•
The only accessories you can operate with this
engine unit are the cutting attachments that we
recommend. Refer to
•
Never allow children to use or be in the vicinity
of the product. As the product is equipped
with a spring-loaded start/stop switch and can
be started by low speed and force on the
starter handle, even small children under some
circumstances can produce the force necessary
to start the product. This can mean a risk of
serious personal injury. Therefore remove the
spark plug cap when the product is not under
close supervision.
•
Running an engine in a confined or badly
ventilated area can result in death due to
asphyxiation or carbon monoxide poisoning.
•
The complete clutch cover and shaft must be
fitted before the product is started, otherwise the
clutch can come loose and cause personal injury.
•
Ensure that no people or animals come closer
than 15 m while you work. When several
operators are working in the same area the
safety distance should be at least 15 m.
Otherwise there is a risk of serious personal
injury. Stop the product immediately if anyone
approaches. Never swing the product around
without first checking behind you to make sure
that no one is within the safety zone.
•
Ensure that people, animals or other things can
not affect your control of the product or that
they do not come in contact with the cutting
attachment or loose objects that are thrown out
by the cutting attachment. However, do not use
the product unless you are able to call for help in
the event of an accident.
•
Always inspect the working area. Remove all
loose objects such as stones, broken glass,
nails, steel wire, string, etcetera, that could
be thrown out or become wrapped around the
cutting attachment.
•
Make sure that you can move and stand
safely. Check the area around you for possible
obstacles (roots, rocks, branches, ditches,
etcetera) in case you have to move suddenly.
Take great care when you work on sloping
ground.
(Fig. 15)
•
Keep a good balance and a firm foothold at all
times. Do not overreach.
•
Always hold the product with both hands. Hold
the product on the right side of your body.
•
Keep the cutting attachment below waist level.
•
Switch off the engine before you move to another
area. Fit the transportation guard before you
carry or transport the equipment any distance.
•
Never put the product down with the engine
running unless you have it in clear sight.
•
Stop the engine and cutting equipment before
you remove material that has wound around the
blade shaft. Neither the operator of the product
nor anyone else may attempt to remove the
Accessories on page 22 .
1687 - 004 - 05.09.2023
Publicité
