Publicité
Les langues disponibles
Les langues disponibles
Converting to Fixed Fuel Systems (Large Propane Tank)
FIRE, EXPLOSION, AND CARBON-MONOXIDE HAZARD
If the information in these instructions is not followed exactly,
a fire, explosion, or production of carbon monoxide may
result causing property damage, personal injury, or loss of life.
This conversion kit shall be installed by a qualified agency in
accordance with the appliance ,manufactures instructions
and all applicable codes and requirements of the Authority
Having Jurisdiction. The qualified agency is responsible for
the proper installation of this kit. The Installation is not proper
and complete until the operation of the converted appliance
is checked as specified in the manufacturer's instructions
•
Only applicable with Ooni Koda 12 and Ooni Koda 16
•
NOT INCLUDED: DH22 model hose and quick connectors to Fixed Fuel System
•
The appliance and its individual shutoff valve must be disconnected from the gas supply piping system during
any pressure testing of that system at test pressures in excess of 1/2 psi (3.5kPa).
•
The appliance must be isolated from the gas supply piping system by closing its individual manual shutoff
valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psi
(3.5kPa).
Instructions
1. Caution: Before proceeding with the conversion; shut off the gas supply and ensure the oven is cool to the
touch. Remove the baking stone and turn the oven upside down.
2. Remove the gas hose using a 19mm wrench.
WARNING
supplied with the kit.
7
Publicité
