Helios AIR1-JVK Notice De Montage Et D'utilisation page 15

Installation and Operating Instructions
m
DANGER
Multi-leaf damper AIR1-JVK
5. Connect the multi-leaf damper actuator via plug (see Fig.8).
2�2�3 Multi-leaf damper AIR1-JVK XH 3500-8500 and RH 5000-15000
The unit must be fully isolated from the mains power supply before all maintenance and installation work and
opening the terminal compartment! The electrical connections must be carried out in accordance with the
relevant wiring diagram and must only be carried out by qualified electricians� The electrical connection must
be fully isolated until the final assembly!
1. Open the latch and turn the handles counter clockwise to open the doors (Fig.9).
2. Apply seal to the flange surface (see Fig.10).
3. Pull the latch and loosen the plate fastening to insert the multi-leaf damper (see Fig.11).
Fig�8
Fig�9
Fig�10
6
EN
Fig�11