SIKA VMI Serie Notice D'utilisation page 28

Installation of VMI
4 Installation of VMI
Before installing, check that
 the wetted materials of the device are suitable for the liquid being used ( § 9.2
"Materials table").
 the equipment is switched off and is in a safe and de-energised state.
 the equipment is depressurised and has cooled down.
SUITABLE TOOLS:
 Use only suitable tools of the correct size.
4.1 Installation instructions
CAUTION! Risk of malfunction due to external magnetic fields!
Magnetic fields close to the device can cause malfunctions and
should be avoided.
 Ensure that no external magnetic fields are present at the instal-
lation site of the VMI.
•
The VMI can always be installed anywhere along the pipeline. Straight sections of piping
are preferable, however.
- 28 -
®
induQ
- Series VMI
© SIKA • Ba_VMI • 01/2016