6 Servicing and maintenance
Cleaning
6
Servicing and
maintenance
6.1 Cleaning
WARNING:
Switch off the appliance before cleaning it.
Only clean the housing with a slightly
damp cloth. Do not use any cleaning agent,
scouring agent or alcohol as these can
damage the housing.
6.2 Replacing brushing roller and
belt
With intensive use or if you frequently
clean very hard carpet floors (the brushing
roller can block), it can happen that the belt
becomes worn and the brushing roller is no
longer
driven
with
Furthermore, the bristles of the brushing roller
can become shorter over time. For this
reason, you can order these parts and if
necessary replace them yourself.
WARNING:
Before you begin with the work, switch off
the appliance and unplug the plug. There is
a risk of injury from rotating parts.
1. Unscrew
both
completely
using
screwdriver and remove the nozzle
protection (Fig. 7/2).
2. Open the cap (Fig. 5/2) by lifting it with a
screw driver (Fig. 5/1). Remove the belt
(Fig. 8/1) with your forefinger or the belt
lifter (Fig. 2/4, optional) from the shaft
(Fig. 8/2).
3. You can now remove the brushing roller
and belt and if necessary replace them.
16
sufficient
force.
screws
(Fig. 7/1)
a
Philips
hand
4. Reinsert the brushing roller (Fig. 9/1) and
belt (Fig. 9/2). Make sure when doing this
that the arrow on the brushing roller
(Fig. 9/3)
is
pointing
corresponding to the arrow of the nozzle
protection part (Fig. 9/4).
5. Replace the nozzle protection (Fig. 9/5)
and screw it down.
6. Now lift the belt with your forefinger or the
belt lifter (Fig. 2/4, optional) onto the shaft.
The belt must run as shown in (Fig. 10) for
the shaft to turn the correct way.
NOTE:
If assembled incorrectly, the belt will
automatically fly off the shaft. If this
happens, put it on the shaft the other way
round.
7. Close the cap (Fig. 1/5).
7
Waste disposal
When
the
appliance has expired, in particular if
malfunctions
finished appliance unusable by removing the
mains plug from the socket and disconnecting
the power cable. Dispose of the appliance
according to the environmental provisions
applicable in your country. Electrical waste
must not be disposed of with domestic waste.
Contact your municipal authority or your
dealer for any advice regarding recycling.
8
Spare parts
8.1 List of wear parts
Item No.
Description
311 00 01
Micropore dust bag
Melitta Swirl DD100
015 0Z 16
Belt
015 0Z 09
Brushing roller
M 193 EC
Accessories set
to
the
left
service
life
of
the
occur,
make
the
Cont.
5
2
1
1