2 Unpacking and connecting
2
Unpacking and connecting
2.1 Unpacking
Unpack the appliance and all accessory parts
and check that the contents are complete.
ATTENTION:
Always transport/send the appliance in its
original packaging so that it does not
become
damaged.
material for this purpose.
Dispose of any packing material that is no
longer required in accordance with the
provisions applicable in your country.
NOTE:
If you should notice damage due to
transport,
then
contact
immediately.
2.2 Using the accessories
The hand-held vacuum cleaner can be used
in versatile ways with the accessories (Fig. 2
and Fig. 3) included in the scope of delivery.
You will get the best suction results if you use
the hand-held vacuum cleaner with one of the
nozzles delivered with it as an accessory.
WARNING:
Switch the hand-held vacuum cleaner off
before
assembling
accessories.
The nozzles and hoses (e. g. the fine
furniture brush (Fig. 4/1) can simply be
pushed into the suction nozzle (Fig. 4/2) and
can be combined in whichever way you wish.
Keep
the
packing
your
dealer
or
removing
the
2.3 Using the nozzles
Furniture brush (Fig. 2/5)
Use this to vacuum dust off objects that have
sensitive surfaces (e. g. cupboards, tables).
Fine furniture brush (Fig. 2/6)
Use this like the furniture brush when the
furniture brush is too wide.
2-in-1 combi-nozzle (only on Handy
Deluxe) (Fig. 5) must only be used with the
long suction hose (Fig. 3/7) as:
- Furniture brush (Fig. 5/1)
Use this to vacuum dust off objects that
have
sensitive
cupboards, tables).
- Upholstery nozzle (Fig. 5/2)
By
simply
removing
attachment (Fig. 5/3) you can make an
upholstery brush (Fig. 5/2) from the 2-in-
1 combi-nozzle. Use this to clean soft,
scratch-resistant
upholstered furniture).
Only use the floor nozzle with the long
suction hose (Fig. 3/7) (only on the Handy
Deluxe)
(Fig. 3/10)
"Converting to a standing cylinder vacuum
cleaner".
2.4 Attaching the shoulder strap
You can use the shoulder strap to make it
easier to carry the hand-held vacuum cleaner
if you are using the vacuum cleaner with a
suction hose.
Just hook both snaplinks (Fig. 6/1) on the
shoulder strap (Fig. 6/2) into the eyelets
(Fig. 6/3).
surfaces
(e. g.
the
brush
surfaces
(e. g.
ZChapter
2.5,
13