Table des Matières
Publicité
1
1.1
Avis aux utilisateurs
For Canada
NOTICE:
This product meets the applicable Industry Canada technical specifications.
The Ringer Equivalence Number is an indication of the maximum number of
devices allowed to be connected to a telephone interface. The termination
on an interface may consist of any combination of devices subject only to the
requirement that the sum of the RENs of all the devices does not exceed five.
AVIS :
Le présent matériel est conforme aux spécifications techniques applicables
d'Industrie Canada.
L'indice d'équivalence de la sonnerie (IES) sert à indiquer le nombre
maximum de terminaux qui peuvent être raccordés à une interface
téléphonique. La terminaison d'une interface peut comporter une
combinaison quelconque de dispositifs, du moment que la somme des
indices d'équivalence de la sonnerie de tous les dispositifs n'excède pas 5.
For U.S.A.
FCC PART 68 REQUIREMENTS:
This equipment complies with Part 68 of the FCC rules and the requirements
adopted by the ACTA. On the cover of this equipment is a label that contains,
among other information, a product identifier in the format
US:AAAEQ##TXXXX. If required, this information must be provided to the
telephone company.
This equipment uses certification jack USOC RJ11C.
A plug and jack used to connect this equipment to the premises wiring and
telephone network must comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA.
A compliant telephone cord and modular plug is provided with this product.
It is designed to be connected to a compatible modular jack that is also
compliant. See installation instructions for details.
The REN is used to determine the number of devices that may be connected
to a telephone line. Excessive RENs on a telephone line may result in the
devices not ringing in response to an incoming call. In most but not all areas,
the sum of RENs should not exceed five (5.0).
1-4
Introduction
bizhub 350/250 (Phase 2.5)
Publicité
Table des Matières
