Urmet Miro 1122/4 Mode D'emploi page 28

7 BUTTONS FUNCTION
State
STAND-BY
Button
---
Predisposition
for entry into
communication
with the call
station
Access
programming
mode (if pressed
for
5 seconds)
(*) If pressed for at least 3 seconds until you hear the confirmation tone (see par. 4.4 PROGRAMMING THE
INTERCOM FUNCTION)
7.1 WARNING LED AND INDICATOR
Multicolour warning LED (5)
LED colour
Off
Red steady
Red flashing
Orange steady
Ringer volume indicator (1)
Red: ringer disabled (MUTE active)
8. OPERATION
8.1 CALL RECEPTION
Following a call, it is possible to start communicating with the caller by lifting the handset.
The conversation with the caller can last up to a maximum of 3 minutes. The call can be interrupted at any
moment by hanging up the handset.
In audio mode, the door phone LED is ON with steady orange light.
28
SECTION FOR USERS
RINGING
DURING
ON-HOOK
AUDIO
(RECEIVING
OPERATION
CALL)
Open Open
pedestrian pedestrian
door door
---
Garage gate Garage gate
door opener door opener
Description
No active function
Handset lifted or call in progress or enabling for communication with the
call station
Programming in progress
In conversation
STANDING AND
HANDSET BY
OFF-HOOK
Open
pedestrian door
Programmable
intercom call 2
---
(Default: not
programmed)
Programmable
intercom call 1
(Default: not
programmed)
STATE OF
PROGRAMMING*
(ONLY WITH DOOR
PHONE IN STAND-BY
MODE)
---
Request association of
intercom function (*)
Select video door phone
call ringtone (5 different
ringtones) / Request
association of intercom
function (*)
DS1122-013