Urmet Miro 1122/4 Mode D'emploi page 27

• T he following screen is displayed:
• Press the icon
successful.
• To exit the programming mode, press and hold for more than 5 seconds on the indoor station A.
In any case, after 10 minutes the device will automatically quit the programming mode, saving
the edited parameters.
The call to the video door phone of the second apartment will necessarily make all video door
phones in the apartment ring.
5. RESET TO FACTORY SETTINGS
To restore the device's factory parameters, after entering programming, press keys
simultaneously for more than 3 seconds; the confirmation of the command takes place with the issue of 2
long beeps and the exit of the device from the programming state.
6. TECHNICAL SPECIFICATIONS
Power voltage: ............................................................................................................................... 27 ÷ 35 V
Maximum consumption: ................................................................................................................ @ 34,5 V
Stand-by: .....................................................................................................................................< 20 mA
Full rate: ...................................................................................................................................... < 85 mA
Terminal output Z, K ........................................................................................................................11 ± 1 Vpp
Working temperature range:............................................................................................................ -5° ÷ 50°C
Dimensions (LxDxH) ........................................................................................................... 90 x 200 x 52 mm
DS1122-013
. Indoor stations A and B emit a beep to confirm that programming has been
and
27