Urmet Miro 1122/4 Mode D'emploi page 24

4 DOOR PHONE INSTALLATION
4.1 INSTALLATION METOD
• I nstall the flush-mounting box Mod. 503 or the flush-mounting box Ø60 at the height indicated in the
following drawing.
• F ix the bracket at the base of the device to the flush-mounting box or to the wall, as indicated.
• Program the configuration dip-switches.
• C onnect the system wires to the terminal block
Box Mod.503
n° 2 M3,5 x 19 mm
• H ook the front panel of the device onto the fixed base.
4.2 DESCRIPTION OF TERMINALS
]
LINE IN Bus Line input
]
LINE OUT Bus Line output
}
Z
Output for connecting supplementary ringers (OP2)
K
24
Box Ø 60 mm
n° 2 2,9 x 13 mm
countersunk screws
2
1
n° 3 screws and screw
anchors included
DS1122-013