IKRA IES 1000 C Mode D'emploi page 25

WARNING! The vibration value may vary according to the usage of the machine and its fitted equipment, and be
higher than the one indicated. Safety measures must be established to protect the user and must be based on the load
estimate generated by the vibrations in real usage conditions. In this regard, all the operational cycle phases must be
taken into consideration, such as switching off or idle running.
Warning: Prolonged exposure to vibrations can cause injuries and neurovascular disorders (also called "Renaud's
syndrome"or "white hand"), especially to people suffering from circulation disorders. The symptoms can regard the
hands, wrists and fingers and are shown through loss of sensitivity, torpor, itching, pain and discolouring of or structural
changes to the skin. These effects can be worsened by low ambient temperatures and/or by gripping the handgrips
excessively tightly. If the symptoms occur, the length of time the machine is used must be reduced and a doctor con-
sulted.
Warning! This machine generates an electromagnetic field when operated. This field can affect active or passive me-
dical implants in certain circumstances. In order to reduce the risk of severe injury or death, we recommend that peo-
ple with medical implants consult their doctor or the manufacturer of the medical implant before operating the machine.
When working with the device, a certain level of noise cannot be avoided. Noisy work should be scheduled for hours,
during which it is allowed by statute or other local regulations. Adhere to any applicable rest times and limit your work-
ing time to the necessary minimum time. For your personal protection and the protection of people nearby, suitable
hearing protection must be worn.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
3. General Safety Instructions
Noise emission information in accordance with the Ger-
man Product Safety Act (ProdSG) and the EC Machine
Directive: the noise pressure level at the place of work
can exceed 80 dB(A). In such cases the operator will
require noise protection (e.g. wearing of ear protectors).
Attention: Noise protection! Please observe the
local regulations when operating your device.
Attention: Using electric power tools, you must ob-
serve following fundamental safety instructions to
protect yourself against electric shock, against dan-
ger of injuries and danger of fire. Read all these in-
structions before using the tool and observe them.
Keep these safety instructions at a safe place.
The machine has been constructed according to the
latest technology and in accordance with the recognised
technical safety regulations. Nevertheless, use of the
machine can involve risks to the user or third persons,
and can cause damage to the machine or other objects.
Use the machine in a safety conscious manner for suit-
able applications and in technically perfect condition only
and according to the operating instructions! Immediately
rectify or have any faults rectified which could adversely
affect safety!
GB | Operating Instructions
Read the instruction manual carefully. It is important that
you fully understand and observe the safety precautions
and warnings before starting and using your tool for the
first time. Careless or improper use of any lawn trimmer-
may cause serious or fatal injury. Observe all applicable
safety regulations, standards and ordinances. Please
familiarise yourself with the machine before the first use.
4. Intended use
The device is intended for cutting lawns and grass areas.
The observance of the manufacturer's operating instruc-
tions included is a prerequisite for the proper use of the
device. Any other use that is not expressly permitted in
these instructions can lead to the device being damaged
and a serious risk for the operator.
Observe the restrictions in the safety instructions.
Please note that our device has not been designed with
the intention of it being used for commercial, trade or in-
dustrial applications. We accept no liability if the device
is used in commercial, trade or industrial operations or
corresponding activities.
Attention! The machine must only be used for its intend-
ed purpose. Any other use shall be considered improper
use. The user/operator, and not the manufacturer, is re-
sponsible for any damage or injuries arising from this.
GB-4