MS Schippers MS Poultry Guide D'utilisation page 4

Connecting the HG20 to the Vision 911.
Run a cable from the Vision 911-control unit to the hanging box of the HG20.
- Connect one end of the cable to plug supplied with the HG20.
Brown wire = L
Yellow wire =
Blue wire = N
Connect the other end of the cable to the Vision 911 as shown in the diagram below.
Brown wire = +
Blue wire = 0
Yellow wire = S
The clamps for plate 1 & 3 are located in the bottom row of clamps.
The clamps for plate 2 & 4 are located in the top row of clamps.
Plate 2- Plate 4
Plate 1 – Plate 3
4