Playback; Playing Discs - Sony DVP-FX980 Mode D'emploi

Playback

Playing Discs

For playable discs, see "Playable Media"
(page 21).
Charge the battery in advance or connect
the AC adaptor.
1
Open the LCD panel, and turn on
the player.
2
Push the PUSH OPEN/CLOSE to
open the disc lid, and place the
disc.
Place with the playback side down and
push gently until it clicks. Do not
touch the lens surface.
Lens surface
Playback side facing down
3
Close the disc lid, and press N.
The player starts playback.
Depending on the disc, a menu may
appear. Press C/X/x/c to select the
item, and press ENTER.
Notes on the screen saver
• A screen saver image appears when you
• The player goes to standby, 15 minutes
To resume playback from the point
where you stopped the disc (Resume
Play)
When you press N again after you stop
playback, the player starts playback from
the point when you pressed x.
b
• Depending on the stop point, Resume play
• The resume point is cleared when:
To play VIDEO CDs with PBC Functions
When you start playing a VIDEO CD with
PBC (Playback Control) functions, the
menu for your selection appears. For the
setup of "PBC," see page 16.
Using the Playback
Information Display
POWER switch
You can check the playback information
and change the playback mode.
When you enter the numbers, use the
remote.
1
leave the player in pause or stop mode
without operation for more than 15
minutes. The image disappears when you
press N. For the setup of "Screen
Saver," see page 15.
after starting the screen saver function.
Press N to come out of standby mode.
may not start from exactly the same point.
– you open the disc lid.
– you press OPTIONS and select USB.
Press DISPLAY while playing a
disc.
,continued
11 US