Optional Accessories - Kreg Foreman DB210 Guide D'utilisation

Common Board Sizes
Nominal Size
1x2
1x3
1x4
1x6
1x8
2x2
2x4
2x6
2x8
4x4
6x6
Actual Size
3 1
⁄ " x 1 ⁄ "
4 2
3 1
⁄ " x 2 ⁄ "
4 2
3 1
⁄ " x 3 ⁄ "
4 2
3 1
⁄ " x 5 ⁄ "
4 2
3 1
⁄ " x 7 ⁄ "
4 4
1 1
1 ⁄ " x 1 ⁄ "
2 2
1 1
1 ⁄ " x 3 ⁄ "
2 2
1 1
1 ⁄ " x 5 ⁄ "
2 2
1 1
1 ⁄ " x 7 ⁄ "
2 4
1 1
3 ⁄ " x 3 ⁄ "
2 2
1 1
5 ⁄ " x 5 ⁄ "
2 2

Optional Accessories

Available from your Kreg dealer or online at www.kregtool.com.
Micro Pocket™ Drill Guide and Drill Bit
ITEM# DB210-MBB
With a hole diameter 25% smaller than our standard pocket hole, the
Micro Pocket™ Drill Guide lets you create compact pocket holes in thin
stock, and tight repair applications.
Kreg Jig
ITEM# DB210-HDBB
Designed for use with "2-by" material, this heavy-duty system drill holes
for #14 x 2
HD Drill Bit
ITEM# DB210-HDB
Replacement drill bit for the DB210 Foreman G2
Kreg Face Clamps™
ITEM# KHC-PREMIUM (3" reach),
ITEM# KHC-LARGE (6" reach),
ITEM# KHC-XLARGE (10" reach)
With a choice of 3"-, 6"-, and 10" reach, there's a Kreg Face Clamp™
that meets your needs.
Tips
Nominal size vs. actual size
At a lumber yard or home center you'll see labels on lumber such as
"1x6" and "2x4." These "nominal" sizes once described the dimensions
of rough-cut lumber before it was milled to finished or actual size.
Actual size is always less than nominal size.
The board-thickness marks on your Kreg Jig refer the actual thickness
of the board. For example, a 1x4 is actually
jig to the ⁄ " mark.
3
4
2"
Nominal
(2" x 4")
HD Drill Guide and Drill Bit
®
⁄ " pocket screws.
1
2
⁄ " thick, so you'll set your
3
4
4"
1 ⁄ "
1
2
Actual
(1 ⁄ " x 3 ⁄ ")
1 1
2 2
3 ⁄ "
1
2