Kreg Foreman DB210 Guide D'utilisation page 3

Masquer les pouces

Table des Matières

Les langues disponibles

icks and cement and other masonry

om chemically-treated lumber.

6) Additional Safety Rules for the DB210 Foreman

om chemically-treated lumber.

a) To reduce the risk of electric shock, this equipment has a

polarized plug (one blade is wider than the other). This plug

fits in a polarized outlet only one way. If the plug does not fit fully

in the outlet, rotate the plug. If it still does not fit, contact a qualified

s varies, depending on how often you

electrician to install the proper outlet. Do not change the plug in any way.

b) Handle the drill guides with care and keep hands away when

they are installed in the machine. The minimal clearance required

• crystalline silica from bricks and cement and other masonry

between the drill bit and the drill guide to enhance hole quality

ea, and work with approved safety

• crystalline silica from bricks and cement and other masonry

products, and

produces a sharp edge that may present a laceration hazard.

products, and

t masks that are specially designed to

c) Keep hands away from the rotating bit and

• arsenic and chromium from chemically-treated lumber.

workpiece clamp when operating the machine.

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you

d) Make sure the bit is completely withdrawn from the workpiece

Your risk from these exposures varies, depending on how often you

and comes to a complete stop before adjusting the workpiece position.

do this type of work. To reduce your exposure to these chemicals:

t with dust from power sanding,

e) Secure the machine to prevent tipping or sliding.

do this type of work. To reduce your exposure to these chemicals:

work in a well ventilated area, and work with approved safety

Never stand on the machine.

work in a well ventilated area, and work with approved safety

, and other construction activities.

equipment, such as those dust masks that are specially designed to

f) Follow all lubrication and maintenance

practices detailed in the instruction manual.

equipment, such as those dust masks that are specially designed to

filter out microscopic particles.

dust to get into your mouth, eyes, or

g and wash exposed areas with

g) This machine is designed for a specific application. Do not

filter out microscopic particles.

• Avoid prolonged contact with dust from power sanding,

modify and/or use it for any other application. If you have questions

dust to get into your mouth, eyes, or

relative to the application of the machine, DO NOT use it until you

• Avoid prolonged contact with dust from power sanding,

sawing, grinding, drilling, and other construction activities.

have contacted Kreg Tool Company and have been advised accordingly.

or respirator should be worn by all

sawing, grinding, drilling, and other construction activities.

e absorption of harmful chemicals.

or respirator should be worn by all

Wear protective clothing and wash exposed areas with

7) The label on your machine may include the symbols below. The

bricks and cement and other masonry

symbols and their definitions are as follows:

Wear protective clothing and wash exposed areas with

soap and water. Allowing dust to get into your mouth, eyes, or

or respirator should be worn by all

soap and water. Allowing dust to get into your mouth, eyes, or

lay on the skin may promote absorption of harmful chemicals.

from chemically-treated lumber.

safety alert symbol

lay on the skin may promote absorption of harmful chemicals.

WARNING: A dust mask or respirator should be worn by all

es varies, depending on how often you

WARNING: A dust mask or respirator should be worn by all

persons entering the work area. The filter should be replaced daily or

volts

uce your exposure to these chemicals:

persons entering the work area. The filter should be replaced daily or

whenever the wearer has difficulty breathing. See your local hardware

hertz

whenever the wearer has difficulty breathing. See your local hardware

store for the proper NIOSH/OSHA approved dust mask.

are as follows:

y include the following symbols. The

store for the proper NIOSH/OSHA approved dust mask.

amperes

• The label on your tool may include the following symbols. The

A .......amperes

symbols and their definitions are as follows:

A .......amperes

watts

symbols and their definitions are as follows:

V ......... volts

A .......amperes

W ......watts

g, and other construction activities.

W ......watts

direct current

V ......... volts

Hz ....... hertz

ng and wash exposed areas with

W ......watts

Hz ....... hertz

.....alternating current

min ..... minutes

alternating current

g dust to get into your mouth, eyes, or

min ..... minutes

... direct current

.....alternating current

.....alternating or direct current

alternating or direct current

... direct current

....... Class I Construction

k or respirator should be worn by all

n o ......no load speed

.....alternating or direct current

Class I Construction (grounded)

....... Class I Construction

ea. The filter should be replaced daily or

...........

(grounded)

n o ......no load speed

...........

(grounded)

culty breathing. See your local hardware

Class II Construction (double insulated)

......earthing terminal

....... Class II Construction

...........

(double insulated)

earthing terminal

......earthing terminal

.....safety alert symbol

ay include the following symbols. The

...........

(double insulated)

.../min per minute

minutes

min

.....safety alert symbol

BPM ..beats per minute

.../min per minute

A .......amperes

per minute

/min

BPM ..beats per minute

RPM ..revolutions per minute

W ......watts

beats per minute

BPM

RPM ..revolutions per minute

.....alternating current

revolutions per minute

RPM

.....alternating or direct current

n o ......no load speed

no load speed

......earthing terminal

Safety

WARNING:

is known to the State of California to cause cancer, birth defects or reproductive

harm. For more information go to www.P65Warnings.ca.gov.

WARNING:

other chemicals, which are known to the State of California to cause cancer, birth

defects or reproductive harm. For more information go to

www.P65Warnings.ca.gov/wood.

WARNING:

expose you to wood dust, a substance known to the State of California to cause

cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for

personal protection. For more information go to www.P65Warnings.ca.gov/wood.

Foreman DB210 motor specifications

120 V~5.0A 2,800 rpm

Guidelines for extension cord use

Extension cords are only to be used for temporary purposes. They do

not replace the need for installation of outlets and proper wiring where

necessary.

In the shop and on construction sites:

1. Extension cords with an equipment grounding conductor must be used at

all times.

2. Extension cords must be protected from damage, and not run through

doorways or windows where the doors or windows may close, causing

damage to the cord.

3. Extension cords should be a minimum of 16 AWG and be rated for the

equipment in use.

4. Extension cords must be periodically inspected to ensure that the

insulation and conductivity of the wires are not compromised.

5. Extension cords should not be run through water or allowed to have

connections that may be exposed to accumulated water.

A .......amperes

TABLE 1

A .......amperes

W ......watts

Extension cord

gauge

W ......watts

.....alternating current

Nameplate Amperes

.....alternating current

@120 V

.....alternating or direct current

0 -5

.....alternating or direct current

n o ......no load speed

5.1 - 8

n o ......no load speed

8.1 -12

......earthing terminal

12.1 - 16

......earthing terminal

.....safety alert symbol

NR – Not Recommended

.....safety alert symbol

BPM ..beats per minute

RPM ..revolutions per minute

This product can expose you to chemicals including lead, which

This product can expose you to chemicals including lead and

Drilling, sawing, sanding or machining wood products can

Extension Cord Length

25'

50'

75'

100'

150'

200'

Table des Matières

Kreg Foreman DB210 Guide D'utilisation page 3

Les langues disponibles

Manuels Connexes pour Kreg Foreman DB210

Produits Connexes pour Kreg Foreman DB210

Table des Matières