Samsung DVD-V6500 Manuel D'instructions page 60

D V D O
Display Options
TV Aspect
Depending on the type of
television you have, you may
want to adjust the screen
setting (aspect ratio).
- 4:3 Letter Box: Select when you want to see the total 16:9
ratio screen DVD supplies, even though you have a TV with
a 4:3 ratio screen. Black bars will appear at the top and
bottom of the screen.
- 4:3 Pan Scan: Select this for conventional size TVs when
you want to see the central portion of the 16:9 screen.
(Extreme left and right side of movie picture will be cut off.)
- 16:9 Wide: You can view the full 16:9 picture on your wide
screen TV.
Black Level
The Black Level feature
adjusts black reference level
in the video signal to one of
two choices:
- On: This will enhance the
Black Level for increased
brightness/contrast when
viewing DVDs.
- Off: This is the Standard NTSC reference Black
Level for consistent brightness/contrast across all sources.
Alt Video Out
The "Alt Video Out" option
must be set in the on-screen
menu if you have connected
your DVD-VCR to a TV using
the S-VIDEO OUT or
COMPONENT VIDEO OUT
jacks.
- S-Video: Select when you want to use S-Video
output.
- Component: Select when you want to use
Component interlace(525i) Out or
Progressive(525p) Out.
All manuals and user guides at all-guides.com
P E R AT I O N S
On
ENG-60
Note
It cannot be adjusted when
set to Progressive.
- See your TV owner's manual to
determine what type of TV you have.
- Interlace: Interlaced Scan mode will
work.
- Progressive: Progressive Scan mode
will work, and Video and S-Video will
not work.
- Press the PROGRESSIVE button on
the front panel or remote control in
stop mode.
Be sure to set the correct Video
output for the proper picture.
Alt Video Out is