Samsung DVD-V6500 Manuel D'instructions page 19

C
O N N E C T I O N S
Connection to an
Connection to an Audio System (2 Channel Amplifier)
1
Using the audio cables, connect the (LINE)
AUDIO (red and white) OUT
rear of the DVD-VCR to the
white) IN terminals of the
2
Using the video signal cable(s), connect the
VIDEO, S-VIDEO or COMPONENT
terminals on the rear of the DVD-VCR to the
VIDEO, S-VIDEO or COMPONENT
terminal of your TV as described on pages 15 to
18.
3
Turn on the DVD-VCR, TV, and Amplifier.
4
Press the input select button of the
select external input in order to hear sound from
the DVD-VCR.
Refer to your Amplifier's user manual to set the
Amplifier's audio input.
Notes
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage
to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 57 to 58)
- The position of terminals may vary depending on the Amplifier.
Please refer to your Amplifier's user manual .
All manuals and user guides at all-guides.com
Audio System
terminals on the
AUDIO (red and
Amplifier.
OUT
OUT
Amplifier to
ENG-19
Audio Cable
Red White
2-channel
Stereo Amp.
Red White