Samsung DVD-V6500 Manuel D'instructions page 58

D V D O
Audio Options
Digital Output
- PCM: Converts to
PCM(2CH) audio.
- Bitstream: Outputs Dolby
Digital via the digital
output. Select Bitstream
when connecting to a
Dolby Digital Decoder.
DTS
Select On when connecting
to a DTS Decoder.
- Off: Doesn't output digital
signal.
- On: Outputs DTS Bitstream
via digital output.
Dynamic Compression
- On: When the movie-
soundtracks are played at
low volume or from smaller
speaker, the system can apply
appropriate compression to
make low-leveel content more
intelligible and prevent dramatic
passages from getting too loud.
- Off : To select the standard range.
PCM Down Sampling
- On: Select this when the
Amplifier connected to the
player is not 96KHz
compatible. In this case, the
96KHz signals will be down
converted to 48KHZ.
- Off: Select this when the
Amplifier connected to the
player is 96KHz compatible.
In this case, all signals will
be output without any
changes.
All manuals and user guides at all-guides.com
P E R AT I O N S
PCM Down Sampling : On
PCM Down Sampling : On
On
On
PCM Down Sampling : On Off
PCM Down Sampling : On
ENG-58
Manufactured under license from Dolby
Laboratories. "Dolby" and the double-D
symbol are trademarks of Dolby
Laboratories.
"DTS" and "DTS Digital Out" are trademarks
of Digital Theater Systems, Inc.
Note
There is no analog audio output when you
play a DTS sound disc.
-
Dynamic compression restrains the
dynamic range of the sound, i.e. the
difference between the loud and
quiet passages of a DVD audio track.
This is useful when watching a DVD
late at night.
Note
Even when PCM Down sampling is
some discs will only output down sampled
audio through the digital outputs.
Off,