Samsung DVD-V6500 Manuel D'instructions page 27

I
N I T I A L
Storing Channels in Memory (Automatic Method)
Auto Channel Memory will automatically seek and store all active channels in your area.
5
Press the "&# buttons to
select Auto Channel Memory,
then press the % or ENTER
button.
The DVD-VCR will
automatically search for all
available channels in the
selected tuner band.
This procedure may take a few
minutes to complete.
When finished, the lowest
channel found will be
displayed.
Adding and Erasing Channels (Manual Method)
Use this feature if Auto Channel Search missed a channel that you would like to add, delete a channel you wish
to remove.
6
Press the "&# buttons to
select Channel Add/Delete,
% or ENTER
then press the
button.
7
Press the CH / buttons to
tune in the channel number
you wish to add or delete.
Use the number button to
select the channel directly.
8
Press the $ or % button to
delete the channel from your
channel list or to add.
Repeat steps 7 to add or
to delete additional channels.
Press the MENU button to exit.
All manuals and user guides at all-guides.com
S
E T U P
CHANNEL ADD/DELETE
Select channel : [07]
and press [ ] to ADD
press [œ] to DELETE
RETURN CH
CHANNEL ADD/DELETE
Select channel : [07]
(in memory)
and press [ ] to ADD
press [œ] to DELETE
RETURN CH
ENG-27
Note
Do not turn the power off when Auto
Channel Memory function is proceeding.
If the power is off, Auto Channel Memory
should be reset.
Note
Use the number button to move the channel
directly.