Samsung DVD-V6500 Manuel D'instructions page 16

C
O N N E C T I O N S
Connection to a TV
- Connecting to your TV using an S-Video cable.
- You will enjoy high quality images. S-Video separates the picture element into black and white(Y) and
color(C) signals to present clearer images than regular video input mode. (Audio signals are
delivered through the audio output.)
1
Using an S-Video cable (not included), connect
the S-VIDEO OUT terminal on the rear of the
DVD-VCR to the S-VIDEO IN terminal of your
2
Using the audio cables, connect the AUDIO (red
and white) OUT terminals on the rear of the
DVD-VCR to the AUDIO (red and white) IN
terminals of your TV.
Turn on the DVD-VCR and TV.
3
With the unit in stop mode, set the Alt video
output to S-Video in the Display Setup menu (see
pages 59~60) or press the
button on the remote control until
output.
4
Press the input selector on your
control until the S-Video signal from the DVD-
VCR appears on your TV screen.
Notes
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 19 to 20)
- The number and position of terminals may vary depending on the TV set.
Please refer to the user's manual of your TV.
All manuals and user guides at all-guides.com
(S-Video)
TV.
PROGRESSIVE
S-Video is
TV remote
ENG-16
Red
White
Audio Cable
S-Video Cable
(not included)
Red White