BaByliss PRO MiraCurl MKII HSB101E Mode D'emploi page 12

CURL DIRECTION SETTING
(Right/Left/Auto)
Use the Curl direction control to
choose either a uniform or natural
finish. Select the curl direction by
sliding the switch to either left "L"
or right "R".
When styling the left side of the
hair, slide the curl direction switch
to the left position - "L". When sty-
ling the right side of the hair, slide
the switch to the right position -
"R". This ensures that the curl sits
towards the face on both sides of
the head and will give a more uni-
form style.
For a more natural look then select
the auto setting "A". This will alter-
nate the direction after each curl.
INSTRUCTIONS FOR USE
• Ensure hair is dry and combed
through.
• Plug the styler into a suitable
mains socket.
• Slide the temperature switch to
the required heat setting.
• The styler is ready for use when
the on indicator light has stop-
ped flashing.
• There are 3 timer settings, choose
the required setting for the hair
type. Alternatively, switch the
audio off to "0".
• Select the curl direction by sli-
ding the control to either posi-
tion "L", "R" or "A"
• Separate a section of hair that is
no bigger than 3cm (Diagram A).
Ensure that the section is clean,
dry and combed through.
• Please note the styler must be
positioned into the hair with the
open part of the curl chamber
facing towards the head. (Dia-
gram B).
12
A
B