ENGLISH
• Instructions in this Setup Guide show the TM-305 printer. Note that your printer may look different from these illustrations in some cases. However, the basic
Important
operations are the same.
Before Setting Up the Printer
In order to ensure that this product is used safely, be sure to read the precautions.
-> Quick Guide (separate manual)
It is recommended that you reserve space of the following dimensions to allow you to work around the printer.
The images below show the space required to install each printer.
• The printer stand may not be included with your model.
• The space required in front of the printer differs on how the basket supplied with the printer stand is used. This shows the installation space when used in the
Important
position in the illustration.
TM-305/TM-300
Installation space (W x D x H)
∙ When using SD-32
66.5 x 67.0 x 53.6 inches (1689 x 1700 x 1360 mm)
7.9 inches
(200 mm)
23.6 inches
(600 mm)
(When using the stand)
Set up the printer using the following procedure.
Assembling the Stand
*
Installing the Printer
Turning On the Printer
Installing the Ink Tanks
Installing the Print Head
Loading Paper
∙ Performing Print Head Adjustment and
Selecting the Connection Method
∙ Connecting to the Printer
∙ Check this also after setup is complete.
Printing From a Smartphone or Tablet
Storing Accessories
Loading Roll Paper After Setup
Displaying the Online Manual
Installation Space
TM-205/TM-200
Installation space (W x D x H)
∙ When not using the stand
54.5 x 53.5 x 29.1 inches (1382 x 1358 x 739 mm)
∙ When using SD-23
54.5 x 67.0 x 53.6 inches (1382 x 1700 x 1360 mm)
11.8 inches (300 mm)
0.4 inches
(10 mm)
(When not using
7.9 inches
(200 mm)
Overview of Setup
* Refer to the
(P.3)
separate manual
(P.3)
(P.5)
(P.6)
(P.7)
(P.9)
(on p.11 to p.13)
(P.13)
(P.13)
(P.13)
(P.14)
1
23.6 inches
(600 mm)
the stand)
7.9 inches
(200 mm)
23.6 inches
(600 mm)
(When using the stand)
If an error message appears during setup or other problems
occur, refer to "Responding to Messages" on p.14.
• Windows is a trademark or registered trademark of Microsoft
Corporation in the U.S. and/or other countries.
11.8 inches (300 mm)
0.4 inches
(10 mm)
7.9 inches
(200 mm)