Use Of Each Component; Gauges - Sym 125i PU12EA-EU Série Manuel D'utilisation

7. USE OF EACH COMPONENT

(The following is 4 stroke air cooling bike's basic operation, and they could vary from
different individual models. Please consult the end of this manual.)
§GAUGES §
The panel figure for speedometer may vary from model to model, but the location usually are the
same.
Tachometer
Turn Signal
Indicator
High Beam
Indicator
CAUTION:
Do not wipe plastic components, e.g. instrument panel, headlight, with organic solvents such as
gasoline...etc to avoid damaging these components.
 Speedometer：
Indicates driving speed（km/h）.
 Odometer：
Indicates total accumulated distance traveled.
 Trip Kilometer:
The rider can measure the trip kilometers.
 Tachometer:
Indicates engine rpm.
 High Beam Indicator：
This indicator comes on with high beam
headlight is turned on.
 Turn (left/right) Signal Indicator：
The left or right Indicator will be flashing
 Fault indicator light
If there is something wrong with the ECU,
the warning light will light all the time.
Fuel Meter
according to the operated directions of turn
signal light switch when it is turned on.
 Transmission Neutral Indicator：
This indicator shows transmission neutral.
 Gear Position Indicator：
This indicator comes on with gear position.
 Fuel Meter:
The pointer in this meter shows how much
fuel remains in the tank.
 Oil Change Indicator:
This indicator shows oil change regularly
every 1,000 kilometers.
6
Gear position
indicator
Speedometer
Transmission neutral
Fault indicator light
Oil Change Indicator
Odometer/ Trip kilometer
Indicator