The Control Of Throttle Valve Handle - Sym 125i PU12EA-EU Série Manuel D'utilisation

§THE CONTROL OF THROTTLE VALVE HANDLE §
Acceleration : To increase speed. When riding
on an inclined road, turn the
throttle valve handle slowly to
allow the engine to output its
power.
Deceleration : To decrease speed.
Maintenance Performance-During The
Initial Period, It Is Better To Drive In Low
Speed For Running The Engine In good
condition and long life.
During the first month or first 1000 km, never excess
60km/h.
Avoid abrupt acceleration.
Avoid engine running in RPM (over 8000RPM) while
under no load.
Do not operate throttle full open from idle running of
engine.
Never Making Abrupt Braking Or Making A
Full Turn.
Extreme braking or making a full turn may cause
wheel slip.
When riding in wet or rainy conditions, making
abrupt braking or making a turn may cause wheel
slip, may lose control of the motorcycle.
Extreme Caution When Riding In Rainy
Condition.
When riding in wet or rainy. Conditions needs longer
distance to stopping the motorcycle. Slow the
motorcycle down early to brake.
When descending a grade, close the throttle fully
and use both brakes to slow the motorcycle.
Deceleration
14
Acceleration