Stanley DUBUIS BCL035C Manuel D'utilisation page 17

LED INDICATIONS
Starting ON the tool
GREEN GREEN
Stopping OFF of the tool
RED RED
Battery charge level
- -
- -
- -
Battery protection CUT-OFF
- -
Temperature protection
YELLOW YELLOW
ORANGE ORANGE
Tool security
-
RED
Maintenance indication
-
ORANGE
Maintenance indication
-
ORANGE
Return for maintenance
-
RED
Tool connected to USB
-
BLUE
0915 - BCL035C - 17
GREEN
-
RED
-
GREEN
-
ORANGE
-
RED
Erreur !
Liaison
RED
incorrecte.
Erreur !
Liaison
-
incorrecte.
- -
- -
- -
-
- -
Press the button ON/OFF tool.
The 3 LEDs lighting GREEN for 1 second.
The front DEL lighting.
The tool is ready for work.
Press the button ON/OFF tool.
The 3 LEDs lighting RED for 1 second. The tool switches OFF.
The tool switches OFF automatically without use during 10min.
After powering ON the tool, if the LED battery is lighting GREEN, the battery
is full charged.
After powering ON the tool, if the LED battery is lighting ORANGE, the battery
is half charged.
After powering ON the tool, if the LED battery is lighting RED, the battery is
discharged. The battery must be recharged. Replace the battery by a full
charged battery.
If the battery is not powerful enough for one cycle, the tool is automatically
locked. The LED battery flashing RED. The front DEL flashing.
DO NOT RELEASE. Remove the empty battery and replace it by a full one.
FINISH CUTTING WITH CHARGED BATTERY.
Recharge the empty battery.
If the temperature is out of range of use, the cycle and maintenance LED
flashing YELLOW and ORANGE. The tool can't be used.
The front DEL flashing.
For user security, the tool is blocked automatically in case of problem. The
LED maintenance flashing RED during 10 seconds.
Press the button ON/OFF tool.
If the indication reappears, return the tool to the DUBUIS after-sales Service.
The LED maintenance lighting ORANGE all the time after ON to indicate the
future maintenance.
The user has 1000 cycles before the final block of the tool.
Return the tool to the DUBUIS after-sales Service.
The LED maintenance flashing ORANGE all the time after ON. The tool is
automatically locked after each cutting.
Press the button ON/OFF tool.
The user has 500 cycles before the final block of the tool.
Return the tool to the DUBUIS after-sales Service.
The LED maintenance flashing RED. The tool is definitively locked.
The front DEL flashing.
Return the tool to the DUBUIS after-sales Service.
When the tool is connected to the USB port, the LED maintenance lighting
BLUE during the connection.
LED lighting for 1 second.
LED flashing.
LED lighting.
English