ECOVACS ROBOTICS Winbot 9 Mode D'emploi page 10

3. Operating the Robot
Loop one end of the Safety Tether to End
1
A on the Robot Power Cord and tighten.
Connect End A and End B and tighten.
2
Loop the other end of the Safety Tether
3
around the Safety Pod's channel and pull
it tight.
If the length of power cord restricts WINBOT 9's movement, a WINBOT Extension Cord can
*
be used. Disconnect End A and End B, and connect them with both ends of the Extension
Cord respectively and tighten.
Only one Extension Cord can be used when WINBOT 9 is cleaning an outside window.
*
8
EN