Publicité
Les langues disponibles
Les langues disponibles
OPERATION
System of automatic reduction of he ating power
Each heating field is equipped with a sys tem
of automatic reduction of he ating power.
When the system is ac ti va ted, the heating
field is switched on at full power for the time
depending on the selected heating power
level, then it is switched to that selected
heating power level.
You activate the automatic heating po wer
reduction system by starting se lec tion of the
heating power level with sen sor (+). In that
case the heating po wer level ("9") is display-
ed with its de ci mal point on.
If you continue selecting the heating po wer
level within the next 10 seconds by touching
sensor (-), the automatic he ating power
reduction system gets activated, and the de-
cimal point remains visible du ring the entire
period of its operation.
If any of the sensors is touched after the period of 10 seconds, the decimal point
is off and the automatic heating power re duc tion system does not ac ti va te.
If you do not want the automatic he ating power reduction system to be activated,
start selection of the heating power level by using sensor (-) (the decimal point
does not light on).
Switching off the entire heating plate
The heating plate is on if at least one of its heating fields is on.
You can switch off the entire heating pla te by pressing the main sensor; this ope ra tion activates
the residual heating in di ca tor.
Switching off one heating field
You can switch off one heating field any time by touching simultaneously sen sors (+) and (-).
The display shows "0" and "H" in turn. The residual heating indicator "H" is ac ti va ted.
12
Level of heating
Working time
po wer
1
2
3
4
5
6
7
8
9
in minutes
1
2,40
4,40
5,20
6,20
1
2,40
2,40
-
Publicité
