Publicité
Les langues disponibles
Les langues disponibles
OPERATION
Pot size:
The diameter of pot and pan base sho uld correspond to the diameter of the he ating element
of the plate as closely as po ssi ble.
Pot cover:
A cover on a pot prevent the heat from escaping, therefore it shortens the he ating time and
reduces power con sump tion.
Control panel
A short buzz will confirm that the hob is connected to its power supply. Additionally, a hob
lock key signal will glow. To switch heating zones on, touch the lock button until the lock LED
goes off.
Note!
Do not put any objects on the area of the sensors (a fault can be trigged), al
ways keep them clean.
Switching on the heating plate
When the heating plate is off, all its he ating
fields are disconnected and the in di ca tor lights
are not on.
You can switch on the heating plate by touching
the main sensor – all in di ca tors show "0" for ten
seconds. You can set then the required heating
power level using sensors (+) and (-) (see Set ting
the heating power).
If no sensor setting is changed during the 10 second period, the heating plate
switches off.
10
Publicité
