Toto DuoFit WT173M Manuel D'installation Et D'utilisation page 7

Use the lower bracket to lock the outlet pipe to the Carrier.
Place the carrier into the wood frame, make sure the carrier is horizontally leveled
and fl ush when placed in the front face of the stud frame.
Use the screws provided for securing the System. Install the outlet pipe to the sewer
pipe.
Horizontal
Vertical
6. Plumb the water supply line and check for leak.
Seal
This indicates that misoperation could result in injury or
physical damage.
Required
The symbol indicates something that must be done.
5. Set the tank to the wood frame
2
3
CAUTION
It is important to reconfirm that there is
no water leakage at all connections.
Do not loosen or tamper with the copper
fittings or joint connections.
Incomplete connection could cause foul odor
or water to leak.
7
1
2
1
1
3
1