Sharp LL-B220 Mode D'emploi page 12

Automatic adjustment (D-SUB only)
When D-SUB is the input, clock, phase, horizontal position,
vertical position are automatically adjusted.
Operate with video signal input.
1. Press button 1.
Automatic adjustment will start.
TIPS
• Depending on the input signal or display image, it may not
be adjusted correctly. In that case, please adjust each item
of the PICTURE menu.(See page 11.)
Adjust
Operate with video signal input.
(Operation example: Adjust BRIGHT of image menu.)
1. Press button 4.
The main menu is displayed.
MAIN MENU
PICTURE
COLOR ADJUSTMENT
INPUT
SETTING
INFORMATION
To close the main menu, press button 1.
10
E
Display Settings
2. Press button 2 or 3 to select PICTURE and press button
4.
Back side
The image menu will be displayed.
Button 1
Button 2
Button 3
Button 4
To return to the main menu, press button 1.
3. Press button 2 or 3 to select BRIGHT and press button
4.
4. Press button 2 or 3 to adjust, then press button 4.
The adjusted content is determined.
To return to the main menu, press button 1.
TIPS
• If you do not operate for a certain period of time, the OSD
screen closes automatically. The time can be changed by
adjusting the OSD TIMER.(See page 11.)
PICTURE
BRIGHT
CONTRAST
H-POS
V-POS
PHASE
CLOCK
PICTURE
BRIGHT
CONTRAST
H-POS
V-POS
PHASE
CLOCK
50
50
50
50
59
50
50
50
50
50
59
50