Publicité
Les langues disponibles
Les langues disponibles
There are ventilation holes around outside of the hob. YOU MUST
ensure these holes are not blocked by the worktop when you put
the hob into position.
Be aware that the glue that join the plastic or wooden material
to the furniture, has to resist to temperature not below 150℃, to
avoid the unstuck of the paneling.
The rear wall, adjacent and surrounding surfaces must therefore
be able to withstand an temperature of 90℃.
9.2 Before installing the hob, make sure that
The work surface is square and level, and no structural
members interfere with space requirements.
The work surface is made of a heat-resistant and insulated
material.
If the hob is installed above an oven, the oven has a built-in
cooling fan.
28
V.1
Publicité
