Publicité
Les langues disponibles
Les langues disponibles
6/ USING YOUR WINE CABINET FOR THE FIRST TIME
IV. Relative humidity level display
Your wine cabinet has a function for measuring humidity levels, allowing
you to see the level of relative humidity inside the appliance, when the
setting is 9 - 15 °C.
The ideal level of humidity is above 50 % and ideally between 60 and 75 %.
To display the humidity level inside your cabinet, press and
hold down the
button for 2 seconds.
V. Setting the lighting mode
1
Press 2 seconsd the
key. The indicator of the active mode will flash
There are 2 setting options for lighting:
Permanent lighting (mood lighting for a cabinet fitted with a glass
door, for example).
Lighting disabled
VI. Charcoal filter meter display
When using the filter for the first time or replacing it, set the meter to 365.
1
Press 2 seconds the
key.
The display will flash.
2
Press the
key to set to 365.
(1-temperature model only)
If you want to increase the level of relative humidity in your cabinet, pour
the equivalent of one glass of water on the humidity cartridge located on
the bottom of the cabinet. You need to remove your bottles before.
2sec
2sec
2
Press the
3
Press the
Precaution: bright light, never look directly at the LED
beam.
Replacement of the LEDs on the control panel
must only be carried out by a qualified electrician.
2sec
3
Press the
The alarm display will switch off
You can consult the meter by pressing the
or
keys to select the desired mode.
key to confirm.
to confirm
key.
17
GB
Publicité
