FAULT
Error messages
CODES/PROGRAM
ME DISPLAY
(E1)
(E3)
(E4)
9
Technical data
The technical data can be found on the type plate, enclosed service card and enclosed
product fiche.
Call up the product fiche for your appliance online:
Access via https://eprel.ec.europa.eu and enter the model identifier of your appliance to
access the product fiche. You will find the model identifier of your appliance on the type
plate.
Alternatively, you can scan the QR code printed on the energy sticker or energy label.
CE Conformity
At the time of its placement on the market, this appliance conforms to the requirements
laid down in the Council directives on the approximation of the laws of the Member
States relating to electromagnetic compatibility, Directive 2014/30/EU, and relating to
the making available on the market of electrical operating equipment designed for use
within certain voltage limits, Directive 2014/35/EU.
POSSIBLE CAUSE
MEANING
Prolonged water
supply time
Washing programme
temperature is not
reached
Flooding
Defect or connection
problem between
main electronics and
control panel
electronics.
REMEDY
residues and the opening of
the detergent container.
POSSIBLE CAUSE AND REMEDY
Tap is not properly turned on or water
pressure is too low.
Water connection tap is scaled.
Commission an plumber for checking.
Customer service work will be charged in
this case.
Heating element is defective.
Contact After Sales Service.
Some parts of the appliance may have
leaks.
Contact After Sales Service.
Power interruption; power failure
Page | 27