Publicité
Les langues disponibles
Les langues disponibles
FAULT
Interior sides of the
appliance are wet after
the wash cycle
Dishes are not properly
clean
Detergent residues in
the appliance
Water stains on plastic
parts
Difficult to remove
white coatings on
dishes, inside the
appliance or on the door
POSSIBLE CAUSE
Normal phenomenon
• Dishes not properly
arranged
• Rotation of the spray arms
is blocked
Clogged spray arm nozzles
Dirty filters
Incorrectly inserted filters
Wrong washing programme
The left and right upper
crockery baskets are not
adjusted to the same height
Tabs have not dissolved in
the short programme
Detergent is lumpy due to
long storage time
Drop formation cannot be
avoided
Deposits of detergent
ingredients
Water hardness range is
incorrectly set
Detergent with multiple
functions or
biological/ecological
detergent used
REMEDY
No action necessary
Load the crockery and cutlery
baskets without spray arms
striking (see chapter
4.5"Loading crockery/cutlery
baskets").
Clean spray arms (see chapter
6 "Cleaning and
maintenance")
Clean filters (see chapter 6
"Cleaning and maintenance")
Insert filters correctly
Select a more powerful
washing programme
Adjust the left and right
crockery basket to the same
height.
Set a more powerful
programme or use powder
detergent
Use new detergent product
• Putting dishes at an angle
(see chapter 4.5 "Putting
away crockery and cutlery")
• Topping up rinsing agent
• Increase water softening
system setting
• Change detergent product
• Clean appliance
mechanically
• Adjust water softening
system to higher water
hardness
• Refill with regenerating salt
• Change detergent product
• Use separate agents
(dishwasher detergent,
regenerating salt, rinsing
agent)
Page | 25
Publicité
