important
P 16
Operating anomalies
When starting up
The compressor will not operate:
- Ensure that there is power to the electrical supply plug by connecting another
electrical appliance to it.
- Ensure that the temperature set values comply with the values given in the
paragraph "Temperature setting"
The compressor will not turn off:
1- Place your hand on the condenser (metal grill located along the exterior wall
behind your cabinet). If the condenser is cold, get in touch with your retailer.
2- If the condenser is hot, increase the desired temperature, if the
compressor does not stop, get in touch with your retailer.
Any intervention on the cold circuit should be performed by a refrigeration
technician, who should carry out an inspection of the circuit sealing system.
In the same way, any intervention on the electrical circuit should be performed
by an electrician.
The power cable is fitted with an earthed plug standard to the country of consi-
gnment. It is essential that, for your safety, the electrical supply to the cabinet
be earthed. Please have the suitability of the socket checked by a qualified
electrician, who will make sure that it is properly earthed and, if necessary,
repair it.
Only a qualified electrician should make any repairs or inspections to your
electrical supply.
ANy INTERVENTION PERfORMED By A TECHNICAL SERVICE
NOT APPROVED By ARTEVINO OR ITS RETAILER WILL LEAD TO
THE GUARANTEE BEING CONSIDERED AS NULL AND VOID.