Publicité
Les langues disponibles
Les langues disponibles
important
Everyday care of your wine cabinet
Your ARTEVINO cabinet is a simple tried and tested item of equipment. The
following few operations enable you to obtain optimum operation and an
extended life cycle.
1) Clean the water drain at the bottom of the wine cabinet. Pay attention that
nothing is blocking this drain.
2) Regularly vacuum (twice a year) the condenser (black metal grill attached
to the back of your wine cabinet).
3) Once a year, thoroughly clean the inside of your wine cabinet, remembering
to unplug it after removing your bottles (use a gentle cleaning product and
water, remember to rinse well and then dry it with a soft rag).
4) It is often necessary to clean the door seal. Using unsuitable cleaning pro-
ducts can cause premature ageing of the seals. Certain rules must therefore
be followed: whenever you clean the seal, always rinse off any cleaning
product with clear water. All traces of cleaning product must be removed
from the seal. ARTEVINO only recommends using a mild soapy solution.
If this proves insufficient, it is possible to occasionally use an ethanol-based
solution, provided that the concentration used is less than 10% and that the
seal is then rinsed thoroughly with clear water.
Hygrometry
You cabinet is equipped with an exclusive ARTEVINO system enabling the
creation, inside your wine cabinet, of the correct humidity level required to
perfectly seal the corks in your bottles.
On installation, it is important to pour the equivalent of a small glass of water
on the floor of the cabinet to start up the heat dynamic pump process.
Thereafter, it is important to add water from time to time.
The long life of your wine cabinet depends on regular monitoring, especially
of anything that may appear abnormal, and informing us of any anomalies
found.
GB
English - P 15
Publicité
