Publicité
Les langues disponibles
Les langues disponibles
P 8
Layout and loading recommendations
Each shelf can be used as a storage, presentation or sliding shelf. Each of your
wine cabinet's shelves has 13 recesses thus enabling you to place your bottles
in total safety.
Shelf in storage version configuration:
To place bottles on a storage shelf, carry out the following:
- Install the shelf in the selected location.
- Place a wooden locking pin in each of the two holes located on the right and
left of the upper face approximately 15 cm in front of the shelf: these pins
butt up against the heat shaped wall and avoid all accidental shelf movement
(See diagram).
- Start by placing the bottles in the rear recesses with the base of the bottle
towards the back.
- Continue by placing the bottles in the front recesses, facing them in the oppo-
site direction.
- Continue stacking the bottles in this way making sure that no bottle touches
the rear wall.
- A storage shelf can hold a maximum of 6 layers, each of 13 bottles, this
representing 78 "Tradition" Bordeaux bottles (100kg).
Shelf in presentation version configuration:
To place bottles on a presentation shelf, carry out the following:
- Install the shelf in the selected location.
- Place a wooden locking pin in each of the two holes located on the right and
left of the upper face approximately 15cm in front of the shelf: these pins butt
up against the heat shaped wall and avoid all accidental shelf movement (See
diagram).
- Start by placing the bottles in the rear recesses with the base of the bottles
towards the back (6 "Standard" Bordeaux bottles).
- Continue stacking the bottles on the rear recesses (7+6+7+6 = 26 "Standard"
Bordeaux bottles) making sure that no bottle touches the rear wall.
- To present the bottles, place them in an upright position on the front of the
shelf (Maximum capacity: 6 "Tradition" Bordeaux bottles).
- In presentation configuration, a shelf can hold a maximum of 38
"Tradition" Bordeaux bottles.".
Publicité
