Etekcity ESF28 Serie Mode D'emploi page 21

Troubleshooting
The scale doesn't turn on.
• Check if the batteries are properly installed. If using the scale
for the first time, remove the plastic insulator strip from the
battery compartment.
Information flashes on the display and then disappears.
• The batteries are low and may need to be replaced.
The smart scale doesn't connect with the VeSync app.
• Make sure your phone's operating system is running on iOS
9.0+ or Android 5.0+.
• Close and relaunch the VeSync app. Make sure you're using
the latest version.
• Make sure your phone has Bluetooth turned on. For Android
users, make sure your Location is turned on as well.
• Make sure your scale and phone are within 10 m / 30 ft of
each other.
• Make sure the scale is not currently connected to any other
phone or app.
• Try turning off any VPN apps.
21